Tunnels not working right DFLW

[XRedRavenX]

I have made a few maps and had my share of problems but this one I cant seem to solve. Got the tunnels to the right place and to the right hieght. But there a black spot you cant see threw but you can walk threw any body know how to fix this?It's driveing me crazy

[XRedRavenX]

Originally posted by XRedRavenX
I have made a few maps and had my share of problems but this one I cant seem to solve. Got the tunnels to the right place and to the right hieght. But there a black spot you cant see threw but you can walk threw any body know how to fix this?It's driveing me crazy

Found a tutorial on stevieB site (thanks stevieB)

[Steve]

[frogman*PR*]

was about to say its ur blink groups hehe , good you found it so fast hehe

[chief*ADFP*]

you may have to hand it over (the map .mis) to some one to see what you are getting at. this way we can help you talk about it is like try to tell you blind folded. do this get a buddie who may look it over see what it doing a "new set eye to see" is better .you may have over look something.

TEAM WORK IS BETTER THEN 1 HOPE sorry have try tunnels 2 mostly i copy & past them a lot doing it from a start is ok if the ground is flat but flate to hill top is something some say turn off the VOX in the map editor for tunnels help to see better lining them up after they are line up turn it back on.
anyway good luck

[chief*ADFP*]

Patch work some time helps

try a patch to cover the black hole area sample buildens some has a wall you can walk into add a 2nd wall to block it help in this area maybe do same with the tunnel area add a wall 45% lean over a bet then move it around soo most of the wall is unseen to most till the hole is cover yea you can see the area (the wall you added in) but its for the most part is block-off now and the blackhole is gone its a cheap patch but its works for the most part.

45% or 90% were ever the hole is lean it soo the wall in most case is behind the tunnel wall you try to keep the tunnel as real as you can or add-in the wall to cover the area sample hole in the floor lay the wall flat on the ground on top of it.. ok it can be seen then like a wall fall down or a wall leaning on its side is cool it use something to cover the bad area P.s add-in 55gal oil-Can don't help the cans blowup, wall's are better they stay put.

[ArcticWolf]

To fix your tunnels, go here