|
Delta Force Anything to do with the Delta Force series of games, DF1, DF2, LW, TFD, BHD, DFX, AF etc. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||
|
aligning walls
any idea for me that will help me align my walls, like castle walls?
|
#2
|
||
|
zoom in real close. Then move one wall so that it end is exactly over the end of the next wall.
I first put the walls in as close together as I can then start at one end, select the second wall in the line zoom in and then align the second wall to the first. Then I make sure the second wall isn't selected and select the third wall aligning it with the second wall. Do that to all the walls. If I'm going to use a lot of walls, I'll get the walls how I like then select 5 of them and copy and past, rotating them if I have too. Hope this helps |
#3
|
||
|
how do i zoom?
|
#4
|
||
|
Try puting something small in the corner you want to line up, like a fence post. Select that after you select what you want to move. You can zoom in to see that and your corners to get it exact. Shift + right mouse and move your mouse to the left or right to zoom in and out.
__________________
WTF-Squad Give a man a fish and he will eat for a day. Teach him how to fish, and he will sit in a boat and drink beer all day. -George Carlin |
#5
|
||
|
zoom = page up / page down
|
#6
|
||
|
use the pg.up/down after u click the spot u want to zoomin onwith mouse 3, or usethe numpad
|
#7
|
||
|
before u zoom hold control and right click then u center the screen .set the snap in the left up to 1 meter selct all your walls rightclick >snap to grid.now they exactly line up.
just move em with the arrow keys to the right spot |
#8
|
||
|
i dont see snap to grid? could that be because of my version of med? im running the med that works for xp, not the unlocked version
__________________
---------------------------------------- I hate Canada! Canadians are completely worthless, they're only good for their bacon! |
#9
|
||
|
object has to be selected when u rite click.in the 2 d editor that is.
|
#10
|
||
|
read the manual that is on the cd u may have to load acrobat reader fromthe dflw cd to read it
CENTER: CTRL+right click centers map by click ZOOM: page up/down, numpad + & - , numpad 3 & 9, shift right click and move side to side SNAP: is a checkbox upper right of med if it is selected objects will be placed at closest grid intersection GRID: a map grid that can be adjusted by + & - buttons by gridbox(above SNAP) ADJUST objects: use arrow keys to fine adjust objects 1/256th M, use CTRL and arrow keys to move 1 M most objects will snap to a 1-2M grid however some u have to adjust manually (concrete,wood,etc walls) |
#11
|
||
|
how do i zoom in on object to aline them like ladders and fences?
|
#12
|
||
|
how do i make tunnals? i would like to make some for my new map
|
#13
|
||
|
lol i didnt notice before this is for landwarrior
|
#14
|
||
|
most of the 2d med controls are the same for LW and BHD
to zoom check my post above !!!TUNNELS!!!! tunnels snap to a 2M grid the Z value is 8M this means the first tunnel section is 8M less than the entrance 2nd level of tunnels is 8M less than first tunnels have to have a blink group #(lower left of item attributes window) otherwise there will be a black area at end of each tunnel section tunnel entrances must be selected as blink group parent(checkbox by blink group # box) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
now this is way off the walls as you can get | Hellfighter | Humor & Jokes | 5 | 10-20-2008 07:35 PM |
aligning tunnels and sewers-help needed | maddog-inc | Joint Operations | 3 | 06-01-2007 07:38 PM |
2 new walls... | EDGE | Sigs and Graphics | 10 | 11-06-2004 12:31 PM |
Some walls I made | EDGE | Sigs and Graphics | 15 | 10-15-2004 06:12 PM |
Walls | smokeedave | Delta Force | 6 | 02-14-2002 04:07 PM |