|
Tech Support Have a problem? Maybe we can help! |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||
|
jo:e RAT server
Anyone know anything about setting one up? If so please respond as I need a walkthrough cause a m8 of mine wants to set one up on his comp!
__________________
|
#2
|
||
|
What do yah want to know?
__________________
|
#3
|
||
|
Pretty much everything...I know nothing and he knows nothing. Id really like someone to talk to him bout it through teamspeak or yahoo or something can ya help with that?
__________________
|
#4
|
||
|
Umm... I will take some SS's and show yah what to set stuff too and I will try and talk him through that...he have MSN?
Also first he may need to find out if he has to forward ports from his DSL/Cable modem.
__________________
|
#5
|
||
|
Add tcwar@hotmail.com to msn
__________________
|
#6
|
||
|
ok I get home in like 30 minutes so I will add then.
__________________
|
#7
|
||
|
rgr
__________________
|
#8
|
||
|
I wish they had made this easier to do!
__________________
|
#9
|
||
|
================================================== ====================
11. How to use the Remote Admin Tool (rat.exe) ================================================== ==================== The Remote Admin Tool, or RAT, gives the host full administrative powers of Joint Operations: Typhoon Rising game servers even if they are on a separate computer. With the RAT, a remote administrator has unlimited universal power, including the ability to adjust game options, add and remove maps, punt players, and "shake up" game-play. Before you can use RAT's substantial power, the server must have certain files properly configured. Login information is set in ADMIN.CFG. It looks like this: //NAME PASSWORD RIGHTS JoeUser yoyoyo 3F Names in this file are not case sensitive but passwords are. Rights are explained in the comments of the ADMIN.CFG file. Don't forget to change the login information when you enable remote access. ADMIN.CFG can also be edited to restrict the IP addresses and domains which can connect to the server. Multiple restriction entries are supported. By default, the restriction looks like this: ip_restrict = 192.168.* A port for the remote administrator must be set in GAME.CFG. By default, the line is: remote_admin_port = 0 When the port is set to 0, remote access is disabled. To enable, set any open port. Numbers between 38000 and 65000 are recommended. For example: remote_admin_port = 40000 Once your login has been established and a port has been opened, a remote administrator must run the RAT executable and login. When the RAT executable is run, a window will display a command prompt. At this prompt type "OPEN [IP]:[PORT]" where [IP] is the server's IP address and [PORT] is the port specified in ADMIN.CFG. For example: OPEN 192.168.1.1:40000 You will be asked for a login and password, in this example "JoeUser" and "yoyoyo." You will be notified if the login is successful. Once you are logged in, press the ENTER key at any time to get a list of available commands. Experiment with these commands to unleash the power of the RAT.
__________________
|
#10
|
||
|
He still doesnt understand it any chance you can contact him or me on ts or a messenger?
__________________
|
#11
|
||
|
Ok... looks like what you need to do is first find the ADMIN.CFG file. That is located in the C:\Program Files\Novalogic\JointOps directory. Double click on it, choose select the program from a list if you get that. Then choose notepad.
In note pad find where it says: ip_restrict = 192.168.* Erase it so it says: ip_restrict = Then fine where it says: //NAME PASSWORD RIGHTS //JoeUser yoyoyo 3F Type in an admin name and password as well as 3F. So it looks like this: //NAME PASSWORD RIGHTS //atholon sucks 3F Now save it. Find Game.CFG in the same folder. Open it and find:"remote_admin_port = 0" Now type in whatever number you want there. Save. Now you go to RAT and type in: OPEN xxx.xxx.xxx.xxx:yyyy Where XXX.XXX.XXX.XXX is the host's IP and the YYYY is the port you are choosing to use. Press enter and it should connect. If you are using a DSL or Cable modem then I believe you need to make sure you forward that port. Contact your ISP for help.
__________________
|
#12
|
||
|
were doing something wrong...I sent ya a pm bout it!
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Freelance JO Sniper server | bail | Gaming Talk | 1 | 12-19-2007 03:19 PM |
Server Control/JO | Pendragon | Tech Support | 2 | 05-11-2005 01:57 PM |
How do I configure my server to use the RAT? | Steve | Joint Operations | 0 | 06-26-2004 05:12 PM |
COp Lauches New JO Server | COp Rok | Gaming Talk | 0 | 05-02-2004 10:38 PM |
~V*D~ Custom Server Up For JO | Genocidal~V*D~ | Joint Operations | 0 | 04-15-2004 06:01 PM |