|
General Chat Talk about anything that does not fit into other topics here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||
|
Knowledge for the bullet shortage...
This is a little project i started a few years back b4 the ammo shortages, because I seen them coming... Since this video was taken 4 years ago i have made many improvements and even built a pneumatic swaging press with push buttons and made it almost effortless... To make the dies you must make or buy a reamer, unless you want to buy a die set from Corbin... I made mine out of drill rod... The video is the process for making the SJHP i use in my CZ-52 but will work with virtually any caliber... Pictures are of my current production capability and one of a basic die for an arbor press... Same basic die i was using in the video... And just think, everything the bullets and dies are made from was bought from recycling center and was thrown away by someone else...
https://www.youtube.com/watch?v=SN4pfrzVJxY The swage die.... Finished 130gr varmint bullets... Loaded 7.62x39 cartridges.... May this knowledge help the freedom effort... |
#2
|
||
|
This is what my 7.62x25 that i use in my CZ-52 looks like... Cartridge on left is the 1950s military corrosive and the one on the right is my homemade cartridge... The brass is even salvaged from scrap brass bin and used to be .223 brass until i cut it down and reformed it...
|
#3
|
||
|
I am the Bullet Farmer...
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|