holy crap, heres ya a website.

[Mauser 98K]

hers ya a website i stumbled across when i was looking up the Joseph Newman motor.

http://www.rexresearch.com/1index.htm

[atholon]

hmm doesn`t look very reputible

[Mauser 98K]

oh, its alright, im building some things off there now.

ive already built a OU(over unity) motor, just gota work the bugs out, this thing will actually charge the batteries when it is running.

it is the joseph newman motor, it works on the backcurrent princaple, when a coil is energised for a time it creates a magnetic field, when the curent is switched off the field collapses and a back voltage is created.

the joseph newman motor has a commutator and 2 sliprings and a coil of over a mile of wire, the one i got has over 4000ft of wire for the field coil.

the sliprings and commutator pulses the current thru the coil of wire at a intervile that allows the coils magnetic field to reach peak and then the curent is then switched off and the current is reversed thru the coil by the second brush on the commutator and after the time constant the current is switched off again and the process repeats.

the collapsing magnetic fields alternating back and forth reinforce themselves if the commutator is tuned corectly the resulting voltages and current that is produced by the collapsing fields is greater than the voltage supplied by the batteries.

the voltage that is emited is alternating so ya can rig a rectifier circuit and run the voltage back into the batteries and actually charge them when the thing is running, the one i got can be run on almost any voltage, and the voltage produced is always greater than the voltage supplied, i got it running off a 12v hobby battery, when running, even under load, it draws less than 1v at around about 100miliamps, thing will run just file on 9v or even 6v.

i stil gota do some adjutments to it but im gona build a 1,000lb unit when i get things worked out and use it to power my house or something.



here is a youtube clip of a newman motor, his is only a resonable facimily of one not a true newman but it works ok, mine looks a little better being i have machined parts, ball berings ,brass shaft, copper commutator and brushes. http://www.youtube.com/watch?v=kgjTShgptjU


got some other thing working on too, got a earth battery om working on, ya got the poles of the earth, nort and south, the magnetic fields flow just like voltage from south to north, if you find abosolute north and south and hammer plates a few feet in the ground every 3-4ft you will find you have a electric potential between the plates, the bigger the plats and the more you have the more voltage and amps you will have, just like a real battery.

even if i cant get this thing to generate power to charge the battery while it is running i can always use the earth to run it, and being the dirt is always there and if you hammer to the water table you will have a infinite power supply to run it off of.


here is a link to such a battery. http://www.rexresearch.com/erthbatry/erthbatry.htm



all this and more is on the site i posted, all kinds of cool items on there.

[Mauser 98K]

son of a, i just spent the last 4 hours winding field winding on a form by hand, only got 5,000ft of #22 AWG wire, half way there, arrrg.