[DFX2] Custom Wave Files In DFX2

[Guest001]

Originally Posted by MAJWIZ

used the wave guidelines you have on your site, but still can't get homemade wav to work. could it be the program i use? pgm converts from mp3 to any format. the wave comes out as 16 bit @41100 pcm wav. all other wav's work ok. the pgm i use is"avc converter" waves will play thru windows ok.

If a file doesn't play, work around the following settings...

FORMAT: PCM Wave
CHANNELS: 2 Stereo - 1 Mono (channel mixer required)
BITS PER SAMPLE: 16bit - 8bit (bit depth converter required)
FREQUENCY: 41100Hz - 8000Hz (sample rate converter required)

[grenadier501]

Or he can try other sound editors, i use Power Sound Editor Free for example to edit sounds for my custom mods and it works fine for me.
I've also found that wav can only be Mono and if the sound is too long, 2 minutes or more for example, you won't hear it or it will play at a very low volume and you'll have to compress it to 8 bits and a lower frequency so the game can play it properly at a higher volume.. it happened to me sometimes when i used to make dfx2 maps..

[MAJWIZ]

thanks fur the help. will try all.

[MAJWIZ]

Grenadier 501: downloaded Power Sound Editor Free WORKED like a champ!!!
thanks for the help and stompem thanks for your help also.

[Guest001]

Originally Posted by MAJWIZ

Grenadier 501: downloaded Power Sound Editor Free WORKED like a champ!!!
thanks for the help and stompem thanks for your help also.

A lot of options with the program +1

I've blocked it from the net just in case.

Which brings this question...

Did you get "Text to Speech" working?

[MAJWIZ]

never tried the "text to speech" just converted mp3 to wave and amped up the vol.
had some music that i wanted to convert.