man i been drying to get one of these

[Hellfighter]

i been trying to find one for a long time that has USB-pin to use connect cable to inside the tower.

USB connection is good but some thing have a block on them to connect to four pins and not a USB port.


details:
Ultra ULT40109 8-Port USB 2.0/Firewire Combo PCI Card
Check it out. See all the ports? Notice the sleek, clean design. The perfect symmetry? It’s our new Ultra 8-port FireWire/USB 2.0 PCI card – and it features plenty of high-speed access for quick and efficient data transmission. The Ultra 8-port FireWire/USB 2.0 PCI card supports high-speed 480Mbits/sec, full-speed 12Mbits/sec, and low-speed 1.5Mbits/sec -- to give you the versatility to handle virtually any kind of data flow. With four external and 1 internal USB 2.0 ports, two external and 1 internal IEEE-1394 (FireWire) with 100, 200, and 400 Mps data rates, you’ve got exactly what you need no matter what your data load might be. And the Ultra 8-port FireWire/USB 2.0 PCI card supports Daisy Chain – that means you can create a huge number of connection possibilities. Simple installation. Maximum performance. The perfect symmetry you need for a complete high-speed data transmission solution. Order the Ultra 8-port FireWire/USB 2.0 PCI card today.

*Specifications

* Interface: PCI
* OS Support:
- Windows 98
- Windows ME
- Windows 2000
- Windows XP
- Windows Vista
- Mac OS
* USB 2.0:
o Transfer Rates:
- Supports High Speed (480 Mbits/sec)
- Supports Full Speed (12 Mbits/sec)
- Supports Low Speed (1.5 Mbits/sec)
o Ports: 4 External, 1 Internal USB 2.0
* IEEE-1394:
o Transfer Rates: 100, 200, 400 Mbits/sec
o Ports: 2 External and 1 Internal IEEE-1394 ports
source: http://www.tigerdirect.com/applicati...srkey=ult40109

[SilentTrigger]

The three of the ports are firewire

[Hellfighter]

yep i can connect USB block cables connection to them!

i have cables in inside my tower and ran out of USB pins n the MOB to connect to, this PCI give me extra to take them cables and connect to.

best part its really cheap to buy. i look at it and thinking gee going to be like 45-80.00 but its not

i more in to them USB-Pins 4-sets to use! then USB ports to use, but hey that's a sweet extra to me

my Video capture card has a USB cable go into a USB port inside to the tower to be plug-in and my Floppy /SD card reader has a 2.0 USB cable "block 4-pin female" connection to MOB to connect to. i will have spare connection so later down the road i can use them if the need comes up

my MOB all USB pins are use up no open ones to use anymore this PCI will let me plug-in them USB Block 4pin female cables into it as will internal USB cables as will go into them USB port too

[Hellfighter]

will i place a order today for this baby now
[update]
got it today only

con is need a floppy power connection to use it.

drawback is i have a floppy card reader and the power supply has only one floppy power supply.

Ultra PSU (1ea power connector)
Ultra Floppy-SD card reader
Ultra Expansion card PCI

have to see about getting a adapter for stander power IDE plug to Floppy plug to go into the expansion pci card

[Hellfighter]

[update today]
i remove it and place it into another PCI slot next (next one below it) to the Video card PCIe 16x slot

its working only i still need get a power adapter IDE (stander power connector DVD, CD, Hard drive) to floppy power connector to plug-in the PCI-card...

i have to search for this power adapter for it stander to floppy

i would think it be easy to make but i don't have the adapter plug to use to make it with.....some fans for tower has adapter to them to plug-in power lead to hard drive

[Hellfighter]

found the adapter i need to power this PCI expansion card up

Ult315838
link: http://www.tigerdirect.com/applicati...8089&CatId=474

s/h and tax it cost way more then the item cost over 10.00+