aligning tunnels and sewers-help needed

[maddog-inc]

aligning tunnels and sewers

Just started to mess with NILE again and just wondered if theres an easy way to align tunnels and sewers as its taking me ages to get them in the right position then testing the map and finding that there not aligned properly.

[Hellfighter]

will there is DF: Xtreme Map editor you can import it into JOTR it has a wire frame to use to line tunnels up with.

sorry i really never care about nile much, don't know if there a wire frame in it or not.


i still have to buy JOTR: E Mod still, have all other but that one.

DFX to JOTR Map editer: http://www.novahq.net/?show=utilitie...et_file&id=326

and all so:

NPJ-2-MIS Converter:
link: http://www.novahq.net/?show=utilitie...et_file&id=324

[Lucky]

you can use the snap option, works like a charm

[the teacher]

Just ajust the height of each 1.Make sure u have absolute height checked off.then just pick a piece,select absolute height and copy wat it says.then select all sewer pipes and put ur copied numbers into the height box(make sure u have d absolute height box checked)they will be aliged exept for some minor stuff.If u want 2 fix d minor stuff, then go in 3D 2 ajust it.Hope this helps(d=the 2=to 1=one wat=what ur=your u=you)