Boating Help

[GaryP]

I started a mountain map and raised the water. I put in some boats. I added 10 waypoints and set everything all up.

I started the boat moving but after it gets to waypoint 3 it takes a left turn and tries to drive thru the mountain, and around again back to the same waypoint never reaching the next waypoint.

I deleted and readded the waypoints 3 times. Is there something that says that a boat can not make a sharp turn?

It's not real sharp but it does not seem like it's making the turn, then keeps turning right thru the mountain.

I made sure I set the waypoints as not looping.

[Sazza]

oyea! change your AI-text to patrolboat or speedboat.
My guess is that you have the unarmed yacht AI-text file on your boats.

Now you can set your WP at 3 if ya want up to about 20 in speed with no problemas.
Sazza

[dfxk_dfbhd]

this helped me i was trying to do that but thet drive were ever
look at my forum above tgis one and help please if you can

[SniperFett~tr~]

whatever boat it is make its Ai textfile Boat-Patrol.
If you have not assigned the boat or boats to a group, do that. Also make sure your waypoints set themselves up right.
For ex. wp 1,0 the next should be 1,1 then 1,2..and so on. Sometimes for some reason they dont set up right. Set their distance number to 2 and give them a name like you did for the boat group. If you want them to loop make sure the box is checked in the Waypoint menu. If not they will go to the last waypoint you have and stop.

The event is easy
No IF statement needed really
Just a THEN statement
Redirect Group(boat group) to Waypoint(whatever one you want them to go to first)
Change Group AIatrol speed:20