If that's OK then...
Assign pilot(s) by (right click) properties or in the events editor.
waypoint 125 = go to any
Pilot = SSN 1
Helo = SSN 2
SSN 1 to waypoint 125 - 2
Redirect SSN 2 to waypoint 1
The helo will start up if AI inside but if it's empty the helo will wait for the AI to get in.
Then it'll start up and fly off but only if it has a waypoint assigned.
Last edited by Guest001; 08-17-2015 at 03:50 AM.
|