Go Back   Novahq.net Forum > Games > Delta Force

Delta Force Anything to do with the Delta Force series of games, DF1, DF2, LW, TFD, BHD, DFX, AF etc.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-14-2009, 02:48 PM
KU43 is offline KU43
KU43's Avatar
Registered User

Join Date: Dec 2003
Location: Arizona
Posts: 486

WACed out AI

When I start writing the wac file everything goes as planned. But after the 5th or 6th ssn movement to a way point they get to the first way point and stall, The boats act as if they are stuck in the mud and the choppers fly around in circles.

I did notice if I assign more than one to a boat they were all running around changing positions so I only put one in the boat. Same thing, the boat just putts around going nowhere. So I used a helicoptes and same thing it flies but never goes anywhere.

I know any little thing can cause these files to become useless and I have checked, rechecked, and checked again. I don't recall this ever happening before but it is really starting to piss me off. Any ideas?
__________________
To disarm the people is the best and most effectual way to enslave them
George Manson
Reply With Quote
  #2  
Old 12-14-2009, 09:03 PM
Mstenger404 is offline Mstenger404
Registered User

Join Date: May 2005
Location: Indiana
Posts: 3,730

Send a message via MSN to Mstenger404
First thing that comes to mind, have you checked the height of your waypoints? over water I take it they're defaulted on the sea floor, so boats wont be able to reach them which causes them to go in circles in hopes of touching it. Same for the helicopters.
__________________


Intel Q9300 Quad~2.5Ghz
PALIT GTX570
ASUS GTX280 Dedicated PhysX
WD Velociraptor 300GB 10k RPM
WD Caviar Black 1TB 7,200 RPM
4GB Patriot DDR3 1333mhz
Intel BOXDX48BT2 X48
Corsair 1000Watt Modular PSU
Windows 7 Professional 64-bit
ASUS VG238H 23" 120Hz 3D-Ready
Reply With Quote
  #3  
Old 12-15-2009, 12:15 AM
MERMITE is offline MERMITE
Registered User

Join Date: May 2006
Posts: 1

Not Enough Information Supplied:
assumption, that you have confused wac to events editor

However, your models behaviour is suggesting that it is unable to locate the next waypoint, right click the item attributes and increase the circle from the default 10m to about 25m, in some examples I use 55m-75m
keep the waypoints close 100-200m apart depending on speed, ensure your models go to red alert and maintain that state
with aircraft you need to keep an eye on the waypoints horizontlly, so it takes off and lands like steps of 20m or so.
"M"
Reply With Quote
  #4  
Old 12-16-2009, 01:28 AM
KU43 is offline KU43
KU43's Avatar
Registered User

Join Date: Dec 2003
Location: Arizona
Posts: 486

Ok I hadn't set the waypoints for boats to sea level but I did the choppers. The wac file is as follows
if never () and past (10) then
ssn2ssn (577,573)
ssn2ssn (578,574)
ssn2ssn (606,603)
endif

1f never () and past (100) then
ssntowp (603,7)
endif

1f never () and past (300) then
ssntowp (573,5)
endif

if never () and past (400) then
ssntowp (574,6)
endif

If by circle you mean distance I tried uping it. I also set the waypoints of ship to sea level. I tried setting the waypoints closer together. Nothing.
__________________
To disarm the people is the best and most effectual way to enslave them
George Manson
Reply With Quote
  #5  
Old 12-16-2009, 01:56 PM
MERMITE is offline MERMITE
Registered User

Join Date: May 2006
Posts: 1

Your wac speak is correct but your grammer is cr@p, once you get past 30-45 seconds wac gets dirty, use the game clock to trigger, assume your game time(TOD) is
1500 (3PM), or consider other trigger, I prefer SSNnearSSN(me,item,3m dist)
also you may have to SSN_isRED,check that with game wac, is for items with motors
only used sometimes not always, depends on item?


if never() and eq(CurTOD,15:00) then
text("15:00") //placeholder trig
endif
if chain(10) then
ssn2ssn (577,573)
ssn2ssn (578,574)
ssn2ssn (606,603)
endif

if never() and eq(CurTOD,15:02)then
ssntowp (603,7)
endif

if never() and eq(CurTOD,15:05) then
ssntowp (573,5)
endif

if never() and eq(CurTOD,15:10) then
ssntowp (574,6)
endif

Go and extract some wacs from the game pff have a look but pratice pratice

and practice somemore

"M"
Reply With Quote
Reply

Tags
dfx, wac files, way points


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lethal AI stompem Delta Force 0 03-24-2011 09:15 AM
Interface with AI stompem Delta Force 33 04-16-2010 09:23 PM
AI states. What is what ?! Donneck Delta Force 1 06-14-2007 12:40 AM
looking for a .ai viewer Steve Sigs and Graphics 3 12-14-2004 04:05 PM
Help with AI DeDRAGE Delta Force 12 06-01-2002 12:47 AM


All times are GMT -5. The time now is 02:57 AM.




Powered by vBulletin®